packet tracer labs

                                                                        

 

CDP Protocol

 

cdp protocol

DOWNLOAD

 

Lab Tasks

1. use CDP commands to find out cisco devices
2. find out their ips and interfaces on which they are conncected.
3. disable cdp on interface FA 0/1 of device 5


 (YOU ARE ONLY ALLOWED TO ACCESS SWITCH 0 THROUGH CONSOLE    CONNECTION)

 (USE TELNET TO ACCESS DEVICE 1 AND DEVICE 5)

 (TELNET PASSWORD - cisco)

 (Privileged mode password - cisco)

 

Lab Configuration 

Task 1

Router#show cdp neighbors

Router#show cdp neighbors detail
 

Task 2

From Switch 0

local interface   -     remote interface

1.    fa 0/1                     fa 0/1

2.    fa 0/2            fa 0/0- 192.168.1.3/24 

3.    fa 0/3            fa 0/0- 192.168.1.4/24

From Switch 1

4.    fa 0/2            fa 0/0- 192.168.1.45/24

5.    fa 0/3            fa 0/0- 192.168.1.43/24

 

Task 3

Router(config)#interface fastethernet 0/5

Router(config-if)#no cdp enable

 

 
Share this page
Facebook Twitter Reddit