192.168.1.13 use and router login
If your home router has been assigned this IP address, click the link below to log into your home or office network.
To login into router Click here
192.168.1.13 is the IP address that belongs to the default IP class C; This IP shares the same subnet with 254 usable IP addresses in one subnet.
255.255.255.0 is the default subnet mask assigned to this IP address however this can be further subnetted into more networks where the number of usable IP are reduced and the number of subnets are increased.
192.168.1.13 IP address is not commonly used by the router companies by default however this is seen mostly in the manual configuration.
Your router may not accept the default username and password if your router has this IP address because this address seems to be manually assigned and a new username and password could have been assigned to the router.
If your login is not working, try hard resetting the router and use the original credentials given to the router.
If you want to change the default IP address, first login into the router and change the IP from the router setup page.
IP address 192.168.1.13 conflict
IP address conflict occurs when the same IP 192.168.1.13 is assigned to another device in the same network. To fix this issue, restart your router or use the command ipconfig/renew to get the new IP from the router.
192.168.1.13 HP scanner IP
If you have installed an HP scanner then you can use that scanner over the network to scan various documents when required and network scanners can be used by many computers because the scanner is not connected to one device but is connected to the Ethernet cable.
What device has IP address 192.168.1.13?
Any device can have this IP address, it depends upon the network design so the network architect can assign this IP address as per the devices available in the network.
This IP can also be assigned through the DHCP server if it has been defined in the IP range available in the DHCP server.
Router login issue
If you are facing any issues while connecting to the router, check the manuals given with the router to fix the issue.
