Author: Seth Carter
What is voice Vlan and how to configure it? Voice Vlan is just like any other Vlan created for voice traffic. Although voice traffic can travel without issue in …
The reason why should every switch have a MOTD banner The right answer to this question is that every switch does not have an MOTD banner however it’s a …
What is a passive interface? Its configuration and use in RIP, EIGRP, and OSPF routing The passive-interface command disables the routing on the specified interfaces. In the RIP routing, …
Understanding and configuring classless IP addressing and use of IP classless command on Cisco router Classless IP addressing means using the IP address of one class with the subnet …
Enable password and enable secret explained with an example lab Enable password and enable secret commands to secure the privileged mode by configuring the password so whenever someone tries …
192.168.1.12 IP is used for router login and can a computer with an address of 192.168.1.12 use a default gateway address of 172.16.1.1? Use the link 192.168.1.12 login to login into …
Cisco packet tracer commands and their use Packet tracer allows us to practice various Cisco commands through simulation. Packet tracer supports lots of commands however it does not support …
192.168.1.11 router login and configuration. 192.168.1.11 is used in home wifi routers as a default IP address. Companies like TP-Link, Cisco, etc can use this IP address in their products so we have …
EIGRP authentication and commands to configure EIGRP authentication is an authentication that is set up to secure the routing tables. Once we have EIGRP authentication in place, the router will authenticate the …
192.168.1.10 IP address used for router login and configuration Click on 192.168.1.10 login to open the router setup page. 192.168.1.10 address is commonly assigned in the new routers from …